by MTX-M2M
The MTX-65ULP terminal is variant model of MTX-65 terminal, but with a very powerful feature: ULTRA LOWER POWER mode, just needing 2.3uA.
The MTX-65ULP is the perfect choice for applications that are battery operated in remote locations as it just needs to use GSM/GPRS radio at a specific moment of the day/week/month or when an event has happened. The MTX-65ULP is the most suitable equipment for metering applications.
The MTX-65ULP just needs 2.3 uA (typ) in ULTRA low-power mode. In this mode, the GSM terminal is completely powered-off, only a specific RTC and wake-up latches inputs are powered.The MTX-65ULP contains a battery capable to run the RTC for 10 years even if the terminal is not externally powered.
When the programmed RTC alarm or an input is triggered the GSM is powered-on, getting the normal power from the source. After the transmission, the terminal can change back to ULTRA low-power mode again.
The MTX-65ULP has Java embedded programmability and a full range of I/Os. The unit can host and control your Java J2ME application allowing you to develop and embed your code directly inside, shortening time to market and reducing costs. The new internal Watchdog supervisor avoids hangs-up.
General features:
• Quad-Band GSM 850/900/1800/1900 MHz • GPRS multi-slot class 12 • GSM release 99 • Output power: - Class 4 (2 W) for EGSM850 & EGSM900 - Class 1 (1 W) for GSM1800 & GSM1900 • Control via AT commands (Hayes 3GPP TS 27.007 and 27.005) • SIM Application Toolkit (release 99) • TCP/IP stack access via AT commands • Internet Services: TCP, UDP, HTTP, FTP, SMTP, POP3 • Supply voltage range: 5.9 - 10 Vdc; typ 7.2 Vdc • Power consumption: - “ULTRA” Low Power mode: typ 2.3 uA max 8uA - Idle mode (registered DRX = 5) 29 mA - Speech mode (average) 250 mA - GPRS class 12 (average) 570mA max • Temperature range - Operation: -20°C to +75°C - Storage: -40°C to +85°C • Dimensions. Excluding connectors: 78.1 x 66.8 x 37.2 mm • Weight: < 190 g
|
Specification for GPRS data transmission: • GPRS class 12 • Mobile station class B • PBCCH support • Coding schemes CS 1-4
|
|
Specification for CSD data transmission: • Up to 14.4 Kbit/s • V.110 • Non-transparent mode • USSD support
|
|
|
Specification for SMS: • Point-to-point MO and MT • SMS cell broadcast • Text and PDU mode
|
|
|
Specification for fax: • Group 3, class 1, 2
|
|
|
Specification for voice: • Triple-rate codec for HR, FR, and EFR • Adaptive multi-rate AMR • Basic hands-free operation • Echo cancellation • Noise reduction
|
|
|
Interfaces:
• FME M 50 Ohm antenna connector • 9 pins subD connector for serial interfaces (ITU-T V.24 protocol) • 15 pins HD-subD connector Expansion Port:
• 2 Operating status LEDs • SIM card interface 3 V, 1.8 V • Plug-in power supply • Handset audio interface |
Open application resources • ARM© Core, Blackfin© DSP • Memory: 400 KB (RAM) and1.7 MB (Flash) • Improved power-saving modes • Internal Watchdog
|
|
Java™ features • CLDC 1.1 Hl • J2ME™ profile IMP-NG • Secure data transmission with HTTPS, SSL and PKI
|
|
|
Over-the-air update • Application SW: OTAP • Firmware: FOTA (OMA compliant)
Ordering information: MTX-65-ULP: 199.801.104
|
Greentech » Environmental Monitoring
Industrial Applications » Tank Monitoring
Power Supply » Battery » Operation / Standby Time
Mechanics » Mounting » Holes / Screw Connect
Mechanics » Vibration » Shock Resistant
Mechanics » Protection Class » Commerical
Environment » Temperature Range » Industrial (-25°C / +65°C)
Interface » Type of Inputs / Outputs » Digital
Interface » Type of Inputs / Outputs » Analog
