IoT Products

site: http://www.four-faith.com/En

 F8914 ZigBee Terminal is a kind of data cellular terminal device that provides data transfer function by ZigBee network.

     It adopts high-powered industrial ZigBee solution and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a ZigBee network, allowing you to connect to your existing serial devices with only basic configuration .It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital 5 I/O channel, ADC, input pulse counter and pulse wave output function.

     It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

 

Design for Industrial Application
1.High-powered industrial ZigBee module
2.Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
3.Housing: iron, providing IP30 protection
4.Power range: DC 5~35V

Stability and Reliability
1.Support hardware and software WDT
2.Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
3.RS232/RS485/RS422 port: 15KV ESD protection
4.SIM/UIM port: 15KV ESD protection
5.Power port: reverse-voltage and overvoltage protection
6.Antenna port: lightning protection(optional)

Standard and Convenience
1.Adopt terminal block interface, convenient for industrial application
2.Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
3.TTL logic level RS232 interface can be customized
4.Support intellectual mode, enter into communication state automatically when powered
5.Provide management software for remote management
6.Support several work modes
7.Convenient configuration and maintenance interface

High-performance

1.Support ZigBee wireless short-distance data transmission
2.Support repeater and terminal device function
3.Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network
4.Support 65000 nodes
5.Support center node, route node and terminal node
6.Support broadcast and target address transfer
7.Support wide communication range
8.Supply 5 I/O channels, compatible 2pulse wave output channels, 3 analog inputs and 2 pulse input counters.

Technical Specification

ZigBee Specification

Item

Content

ZigBee Chip

Industrial ZigBee Chip

Standard and Band

IEEE 802.15.4

ISM 2.4 GHz

Indoor/Urban Range

30m

90m(With PA)

Outdoor/RF Line-of-Sight Range

500m

2000m(With PA)

Transmit Power

2.82 mw (+4.5dBm)

100 mw (+20dBm) (With PA)

Bandwidth

250Kbps

Receiver Sensitivity

-97dBm

-103dBm (With PA)

Network Topologies

Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh

Number of channels

16 Direct Sequence Channels

Channels

11 to 26

Max packge size

300 Bytes

 

Hardware System

Item

Content

CPU

Industrial ZigBee Processor

 

Interface Type

Item

Content

Serial

1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection

Data bits: 8

Stop bits: 1,2

Checksum: none,odd,even

Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Indicator

"Power", "ACT", "ZigBee"

Antenna

Standard SMA female interface, 50 ohm, lighting protection(optional)

Power

Terminal block interface, reverse-voltage and overvoltage protection

 


        

                  

 

Figure-1 F8914 Interfaces illustrate

 

 

Power Input

Item

Content

Standard Power

DC 12V/0.5A

Power Range

DC 5~35V

 

Power Consumption

Working States

Power Consumption

F8914-N

Coordinator

Idle Mode

13.5~13.8mA@12 VDC

RX Mode

13.6~13.7mA@12 VDC

TX Mode

14.0~14.4mA@12 VDC

Router

Idle Mode

13.2~13.4mA@12 VDC

RX Mode

13.2~13.7mA@12 VDC

TX Mode

13.9~14.1mA@12 VDC

EndDevice

Idle Mode

6.2~6.4mA@12 VDC

RX Mode

7.1~7.4mA@12 VDC

TX Mode

8.9~9.4mA@12 VDC

Timing wake up

3.2~3.3mA@12 VDC

Deep Sleep

2.2~2.3 mA@12 VDC

 

F8914-E  (With PA)

Coordinator

Idle Mode

15.9~16.1mA@12 VDC

RX Mode

16.3~16.6mA@12 VDC

TX Mode

21.3~22.2mA@12 VDC

Router

Idle Mode

15.9~16.3mA@12 VDC

RX Mode

16.2~16.6mA@12 VDC

TX Mode

21.5~22.4mA@12 VDC

EndDevice

Idle Mode

6.6~6.9mA@12 VDC

RX Mode

8.0~9.2mA@12 VDC

TX Mode

13.3~14.2mA@12 VDC

Timing wake up

4.1~4.5mA@12 VDC

Deep Sleep

3.2~3.5 mA@12 VDC

 

Physical Characteristics

Item

Content

Housing

Iron, providing IP30 protection

Dimensions

91x58.5x22 mm

Weight

205g

 

Environmental Limits

Item

Content

Operating Temperature

-25~+65ºC (-13~+149℉)

Extended  Operating Temperature

-30~+75ºC (-22~+167℉)

Storage Temperature

-40~+85ºC (-40~+185℉)

Operating Humidity

95% ( unfreezing)

CHARACTERISTICS:

Power Supply » AV Voltage Supply » 110V - 240V