IoT Products

MTX-LTE TERMINAL 

The MTX-LTE terminal is a new industrial M2M family modem ready to work in 4G-LTE and CDMA or 3G-HSPA+ network especially designed for applications that need high speed data transmission and low latency. 

MTX-LTE family:

  • LTE
    • European Quad-band DC-HSPA+/HSPA+/HSPA/UMTS 850/900/1900/2100MHz
    • North America Penta-band DC-HSPA+/HSPA+/HSPA/UMTS 850/900/1900/AWS/2100MHz
    • CAT3 3GPP Release 8 UE DL 100Mbps, UL 50Mbps
    •  CDMA/EVDO 800/1900MHz
      • 3G/UMTS
        • Quad-band HSPA+/UMTS 850/900/1900/2100MHz
        • HSPA+ :UL (5.76 Mbps)/DL (42 Mbps)
  •  Quad-band EDGE/ GPRS/
    • Multi-slot Class 12 

Industrial featured: The MTX-LTE unit can be used in industrial applications. Temperature range: -30 + 75ºC.

External interfaces USB and serial RS232 port*.

Linux, Android and Windows drivers available. Control by AT commands.

GPS receiver featured: GPS, AGPS, GLONASS. 

MTX-LTE features power restart in case of power faulty conditions. 

The MTX-LTE terminal is an all-in-one solution enabling voice, SMS, fax and data at high speed LTE. IP Stack support IPV4 – IPV6If 4G-LTE is not available, it will switch to 3G or 2G automatically. 

MTX-LTE is RoHs & WEEE compliant. It is manufactured with the ISO 9001 & IS0 14001 Quality certifications.

A full list of antennas, cables and supplies accessories are available.

Technical Specification

General features:

• World Wide Version:

UMTS/HSPA+: Five band 800/850/900/1900/2100MHz

GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz

• European Version:

UMTS/HSPA+: Dual band UMTS 900/2100MHz

GSM/GPRS/EDGE: Dual band GSM 900/1800MHz

• American Version:

GSM/GPRS/EDGE: Dual band GSM 850/1900MHz

UMTS/HSPA+: Dual band UMTS 850/1900MHz

  • 3GPP Release 6, 7

DL 7.2Mbps, UL 5.7Mbps

HSDPA Cat.8 / HSUPA Cat.6 data rates

• Control via AT commands

(Hayes 3GPP TS 27.007 and 27.005)

• SIM Application Toolkit (release 99)

• TCP/IP stack access via AT commands TBD

• Supply voltage range: 6 ... 30 V

• Power modes

- Power down

- Sleep mode

- Idle mode

- Airplane mode

• Temperature range

- Operation:-30°Cto +85°C

- Extended*:-40°Cto +90°C

• Dimensions. Excluding connectors: 78.1 x 66.8 x37.2 mm

• Weight: < 190 g

 

Interfaces:

  • DB9 DSUB: RS232  8-Wire modem interface TBD
  • USB 2.0 port High Speed (480Mbit/s)
  • Operating status LED
  • SIM card interface 3 V, 1.8 V
  • Audio interface RJ connector
  • Plug-in RJ power supply
  • FME M 50 Ohm antenna connector

 

MODELS 

MTX-LTE+GPS

GPS featured

MTX-HSPA+/CMDA

3G/HSPA and CMDA EVDO network. GPS

MTX-CDMA

Only CDMA network

MTX-HSPA+

Only 3g HSPA+ network 

Worldwide and local country variants available

 

LTE (FDD) B1/B2/B3/B5/B7/B8/B20

•Receive diversity DC-HSPA+/HSPA+/HSPA/UMTS 2100/1900/900/850 MHz

•MIMO HSPA+/DC-HSPA+ DL 2*2 MIMO LTE: DL 2*2 MIMO

•Max. transmitter power WCDMA/HSPA+:+24dBm (Power Class 3) GSM/GPRS 1900MHz/1800MHz: +30dBm (Power Class 1) GSM/GPRS 900M/850MHz: +33dBm (Power Class 4) EDGE 1900MHz/1800MHz: +26dBm (Power Class E2) EDGE 900M/850MHz: +27dBm (Power Class E2) LTE: Accorded with 3GPP TS 36.101 R8 Class 3(23dBm)

• Control via AT commands 3GPP TS 27.007 and 27.005 •  IP Stack support IPv4 / IPv6

• GPS Standalone, A-GPS, GPS

 

HSPA features  3GPP Release 6, 7

  • DL 7.2Mbps, UL 5.7Mbps
  • HSDPA Cat.8 / HSUPA Cat.6 data rates
  • Compressed mode (CM) supported according to 3GPP TS25.212

UMTS features 3GPP Release 4

  • PS data rate – 384 kbps DL / 384 kbps UL
  • CS data rate – 64 kbps DL / 64 kbps UL

 

GPRS/EGPRS features:

GPRS class 12

  • Mobile station class B
  • PBCCH support
  • Coding schemes CS 1-4

EGPRS:

  • Multislot Class 12
  • EDGE E2 power class for 8 PSK

CSD:

  • V.110, RLP, non-transparent
  • 9.6kbps
  • USSD

SMS Features:

• Point-to-point MO and MT

• SMS cell broadcast

• Text and PDU mode

 

MTX-LTE Datasheet