IoT News

composite of hand pointing at graphics with blue background

SomosID launch: A new era in IoT security management

Somos has introduced SomosID, an innovative IoT identity management service that offers a registry for IoT asset owners seeking to gain greater visibility into their installed asset(s). (more…)

Read more

February 19, 2024

Posted by: Magda Dabrowska

close up female filling form car service

Rohde & Schwarz and Sony validate NTN NB-IoT device with advanced testing

In collaboration with Sony, Rohde & Schwarz has validated and verified Sony Altair’s device for its NTN NB-IoT capability. Using the advanced R&S CMW500 mobile radio tester platform from Rohde & Schwarz, Sony was able to verify all 3GPP defined RF parameters on their chipset in an interactive testing mode, in both geostationary orbit (GEO) and geosynchronous orbit (GSO). The company also validated the released protocol conformance test cases (PCT) for compliance, demonstrating exceptional performance and reliability of the Sony device. Additionally, both companies have committed to completing Skylo’s certified test plan on the R&S CMW500 as part of the carrier acceptance program. (more…)

Read more

February 15, 2024

Posted by: Magda Dabrowska

Hologram projector screen with cloud system technology

Simplifying Wi-Fi 7 device testing by Keysight

Keysight Technologies has introduced the E7515W UXM Wireless Connectivity Test Platform for Wi-Fi, a network emulation solution delivering signalling radio frequency (RF) and throughput testing for devices using Wi-Fi 7, including 4×4 MIMO 320 MHz bandwidth.

Developed by the IEEE as the 802.11be standard, Wi-Fi 7 is the next generation of Wi-Fi wireless communications technology, promising significant performance advancements and improvements over the previous Wi-Fi 6E and Wi-Fi 6 standards.

As with any new wireless technology, device makers must perform signalling RF and throughput on clients and access points (AP) to ensure Wi-Fi 7 devices work as intended when deployed. However, existing solutions require complicated test setups with a large number of Wi-Fi devices and network channels to emulate real-world operating conditions.

The newest Keysight UXM Wireless Connectivity Test Solution addresses this challenge by giving RF engineers a solution that simplifies Wi-Fi 7 testing and provides a physical (PHY) layer and media access control (MAC) layer insights.

The E7515W UXM Wireless Connectivity Test solution offers the following benefits:

  • Built on proven Keysight metrology: Expands the market UXM 5G Network Emulation Solution to simulate Wi-Fi devices and traffic to cover new use cases on the latest IEEE 802.11be standards.
  • Wi-Fi 7 scale: Emulates hundreds of clients at once with traffic simulation without the need for additional equipment.
  • Wi-Fi 7 throughput: Supports Wi-Fi 7 4×4 MIMO 320 MHz bandwidth and performs Wi-Fi 7 signalling RF and throughput testing on clients and APs, including the latest 802.11 variants.
  • Deeper insights: Uses analysis software to provide PHY / MAC-level information such as rate versus range, enhanced Rx sensitivity, radio unit (RU) sweep analysis and full-rate throughput to generate relevant Wi-Fi signalling and RF throughput results.
  • Integrated platform: Tests more complex devices with 5G and LTE capabilities Wi-Fi/cellular interworking validation as well as integrated fixed wireless access (FWA) testing for the fast-growing customer premises equipment (CPE) market.
  • Simplified testing: Offers inherent synchronisation, better repeatability, reduced time spent on cabling and test setup, higher automation and faster debugging and reporting.

“With the introduction of the E7515W solution, Keysight is expanding the market leading UXM 5G Network Emulation Solutions to simulate Wi-Fi devices and traffic to cover new use cases from the latest IEEE 802.11be standards,” said Mosaab Abughalib, a senior R&D director and general manager for Keysight’s Wireless Test Group. “The E7515W solution enables faster test setups with less complexity and delivers better load and bandwidth performance to help Wi-Fi 7 device makers accelerate time to market.”

Comment on this article below or via X @IoTGN

Read more

February 14, 2024

Posted by: Magda Dabrowska

medium shot man wearing vr glasses

Innovative Golioth platform accelerates IoT prototyping

Golioth, an Internet of Things (IoT) platform founded by Jonathan Beri, aims to change IoT development. Beri drew from his more than a decade of experience working with tech giants to position Golioth as an innovative solutions provider, simplifying the creation of connected products to enhance the developer experience. (more…)

Read more

February 13, 2024

Posted by: Magda Dabrowska

glowing skyscrapers illuminate futuristic cityscape night

RMC launches intelligent Hydel Solutions for Water IoT in India

RMC Switchgears Limited (RMC) is pleased to announce the establishment of its new subsidiary, Intelligent Hydel Solutions Private Limited, marking a significant stride in the realm of Water IoT Solutions. With a majority stake of 51% in the newly formed entity, RMC is set to make its mark in the water management sector through innovative, intelligent solutions tailored for the Indian landscape. (more…)

Read more

February 12, 2024

Posted by: Magda Dabrowska

networking concept still life

CSL launches Satellite for critical IoT connectivity

CSL, a company in Critical IoT Connectivity industry, has announced the launch of CSL Satellite. CSL Satellite provides Critical Connectivity to remote or challenging environments, where mobile or fixed broadband options are unavailable or unreliable. (more…)

Read more

February 9, 2024

Posted by: Magda Dabrowska

medium shot man wearing vr glasses

New Vista Capital invests in LocatorX for supply chain IoT advancement

LocatorX, a provider in the supply chain IoT (Internet of Things) sector, has announced a partnership with New Vista Capital. This partnership strengthens the company’s focus on the acceleration and next phase of growth in both the aerospace and defence industry and broader national security, supply chain and manufacturing industries. (more…)

Read more

February 8, 2024

Posted by: Magda Dabrowska

OptConnect acquires Latin American M2M

OptConnect has announced it has acquired Latin America-based M2M DataGlobal (M2M), an organisation in Latin America. Together these businesses create a premier managed wireless connectivity platform of scale, capable of supporting customers across a broad spectrum of industries and solution needs throughout North and South America.         (more…)

Read more

February 7, 2024

Posted by: Magda Dabrowska

SEALSQ’s WISeToy: Art meets security

SEALSQ and Post-Quantum technology, in collaboration with its parent company WISeKey International Holding and a contemporary visual pop-art French artist Ylan Anoufa, have announced the development of the AnoufaBears Intelligent Secure Toy, codenamed WISeToy. This initiative aims to safeguard children’s interactions with the Internet, combining state-of-the-art security technology with artistic vision. (more…)

Read more

February 6, 2024

Posted by: Magda Dabrowska

High voltage tower isolated on sky,blue toned.

Kaleido Intelligence predicts over 1 billion IoT connections in energy sector by 2028

New research from Kaleido Intelligence has found that oil and gas, and mining extractive industries, combined with power generation and distribution, will use over 1 billion IoT connections by 2028. This represents more than a 60% increase over 2023. (more…)

Read more

February 5, 2024

Posted by: Magda Dabrowska